WELCOME TO BREEZE-INS

CALL US

0439591274

INSTALLATION PROCESSS

HOME/INSTALLATION

Installation Easy as 1, 2, 3

Step 1

Make sure the glass surface is clean and free of contaminants. PLEASE NOTE: BREEZE-INS will only work if the suction cup can be secured on the glass window or door. The suction cup cannot be used to attach to any other surface such as architraves or flooring.

Step 2

Use the suction cup to place your BREEZE-INS at the height you would like the bottom bar of the roller blind or bottom rail of your venetian blind positioned.

Step 3

Lower the blind into the clamp, once the blind is in position gently raise the blind up so the top hook of the clip catches on the top of the bar and the blind is secured within it.

Depending on how windy the conditions are you may have to adjust the amount the window is opened to maintain the clips functionality. To do so remove the bottom rail from the BREEZE-INS by releasing the tension of the blind, put the rail out the clip, the close the window to the desired opening width and repeat step 3.
If you leave the BREEZE-INS (R) attached to the window during very high winds the blind rail will pop out of the clip or the suction cup will release from the window insuring no damage is done to the blind.